Windscreening.com :: Tennis Court Windscreen and Nets

First thing before you install your tennis court net is to make sure the tennis post and the anchor is flush with the tennis court surface. Ensure that the center strap anchor is perfectly parallel with the center line of the net.

You must attach the loop end of the tennis court net to the dead end hooked post. Make sure the cable is short enough to cover the tennis court you may have to adjust the cable lenght depending of the location of the tennis post anchor. After you connect and adjust the net loop pull the net and cable to the winder system post. Insert the cable into the winder and start winding. Crank the tennis winder until the net is a bit more than three feet high at the center.

Insert the side dowels into their pockets. Attach the lacing twine chord to each post through the headband and side grommets and the post loop. Try to attach with the same strenght on each side so the net will keep his shape. Finish the installation at the bottom of the post. The last thing is to install the center strap to keep the tennis court net height at 3’ from the court surface at the center and 3.5” at each post end side.